PARTS OF THE HEATER
Parts of the heater
1. Thermostat Control
2. Pilot Light
3. Power Control
4. Safety Grille
Symbols
Power Off
Fan Only
Low Heat Setting
High Heat Setting
OPERATING INSTRUCTIONS
1. Set the heater on a dry, level surface.
2. Make sure the Power Control is in
(off) position. Plug cord into any standard 120 V AC outlet.
3. Set the Thermostat Control all the way to
(maximum).
4. Set the Power Control to
for fast warm up of a room. Once the room is comfortable, select to reduce electrical
consumption and to prevent the room from becoming too warm.
5. For fan-only operation, without any heat output, turn the Power Control to
.
6. This heater is equipped with a thermostat function to control the temperature output. To increase the heat output, turn the
Thermostat Control clockwise to
. To reduce the heat output, turn the Thermostat Control counterclockwise to .
PILOT LIGHT
This fan heater is equipped with a Pilot Light, which glows whenever the heater is plugged in and turned on. It will continue to glow
even if the thermostat has cycled the heating elements off. This feature is to prevent you from being unaware that the heater is in
operation.
THERMAL CUT-OFF PROTECTION SYSTEM
This heater includes an Overheat Protection System that shuts the unit off when a potential overheat temperature is reached. If this
occurs, the heater can only resume its normal operation after resetting it. To reset the heater:
1. Turn the Power Control to OFF position.
2. Unplug the heater and wait 10 minutes for the unit to cool down.
3. After the 10 minutes, plug the unit in again and operate normally.
CLEANING AND MAINTANENCE
1. Turn the Power Control to (off) position and unplug the heater before moving or cleaning.
2. Interior dust can often be removed by using a vacuum cleaner with a crevice tool attachment.
3. To clean the enclosure, use a clean, soft and lightly damp cloth to gently wipe off the dirt from the surface of the unit. Be sure
not to wet the Heating Element and the switches. Allow the unit to dry completely before use.
4. Do not use cleaning liquid or other chemicals to spray on the unit.
STORAGE
1. Perform the cleaning procedures described above.
2. Wipe all parts dry.
3. Pack the heater in a plastic bag and store it in a cool, dry place. We recommend that you store the heater in its original carton.
TROUBLE SHOOTING
If your heater fails to operate:
Make sure the electrical outlet or circuit breaker is working.
Check for obstructions. If you find an obstruction, turn the heater OFF, and UNPLUG THE UNIT. Carefully remove the
obstruction and follow the reset instructions.
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals